|
NEWS
 Tejera Microsystems Engineering, Inc. announces
a new high volume check valve
High volume
means new applications
Tampa ,
FL August 12, 1997 - Today Tejera
Microsystems Engineering, Inc. (TME) unveiled their
plans to market a new high volume check valve. The
new check valve is targeted to solve the limitations
of other check valves when used in high volume smoke
systems. It also works great to eliminate those
end plugs in the fill line used in "three
line" tank applications. Using a
Flourosilicon diaphragm and a Type 66 H.S. Nylon
housing the check valve is lightweight and compatible
with smoke oils, petroleum products and methanol and
nitromethane. The new check valve is made with an
oversized diaphragm to supply in excess of 16+ oz.
per minute without choking. More than enough to keep
up with electric fuel pumps.
No more lost
fill plugs
The high volume capacity and low forward
resistance make this check valve perfect for
replacing fuel tank plugs in filler
applications. (Great for smoke tank applications) No
more lost or fallen fill plugs when you simply
fill your tank through the check valve. When you
remove your supply hose the fill line automatically
shuts off. While any check valve will do this, ball
style check valves tend to leak. Other diaphragm
check valves will restrict and slow the fill process
down.
A solution
for smoke systems
Many GIANT SCALE modelers have discovered that
when supplying the high volume of oil necessary for
awesome smoke, some check valves choke up under the
high pressure. The check valve actually starts to
restrict the oil as you attempt to increase the flow.
The solution has been to use two check valves side by
side in order to share the load. This requires an
extra "T" fitting in some cases. The new
TME check valve can handle gallons per minute so you
can simply use one check valve for even the largest
smoke systems.
The TME check valve can operate between -20
degrees to 210 degrees Fahrenheit. It features sonic
welding making it nearly impossible to come apart
under normal conditions. It is sensitive to pressure
differentials as low as 1/2 pound per square inch and
is ideal for systems working between 3 and 15 pounds
per square inch. The TME check valve boasts
ultra low leak rates and supports 1/8 ID
tubing.
For more information contact TME at 813-968-9510 or
visit their web site for the latest information and
specifications at http://www.TMEnet.com Model
HVV-CV1
|